SECATEC-Sensoren GMG12OOOK

Burst sensors signal the triggering/opening of bursting discs. They are easy to install as part of the bursting disc and in the indoor and outdoor (IP67) applications. In the versions with a PTFE tip the trigger element remains on the sensor when it snaps off so that no parts soil the container contents/silos. Approved under (look also our Certificates) II 2 G Ex ib IIC T6 Gb II 2 D Ex ib IIIC T80 °C IP65 (Db) -25 °C <+80 °C IBExU05ATEX1035 Installation inside the sensor is a resistive sensor. A conductor loop is printed on the hybrid circuit protruding from the housing and protected by a flask, which is broken by the bursting of the disc and so permanently interrupting the circuit the sensor is installed as part of the bursting disc Advantages flask made of glass or PTFE PTFE flask remains on the sensor when triggered can be retrofitted length of connecting cable can be freely selected (standard 2 m) 4-wire versions with 2 separate circuits Applications bursting discs dust filters